TorcUP TXU-16
Low-profile cassette design with a top-mounted hose connection for restricted clearance.
Series illustration. Version and accessories depend on the model.
Your cassette.
Your torque range.
The effective lever arm differs between cassette groups. Each group therefore has its own pressure-to-torque chart.
Select your across-flats size or cassette group.
| Across-flats range | At 69 bar | At 689 bar | Table range |
|---|---|---|---|
| 55–100 mm | 2.206 Nm | 21.040 Nm | 69–689 bar |
| 101–117 mm | 2.404 Nm | 22.926 Nm | 69–689 bar |
| 118–135 mm | 2.813 Nm | 26.829 Nm | 69–689 bar |
The values are for tool selection. Use the individual calibration chart for the specific tool when setting the pressure. Please enquire about standard across-flats sizes and the required version.
Source: TXU operating instructions, PDF page 15. The weights and dimensions below are model specifications, not confirmed individual values for each across-flats size.
Technical specifications & clearance.
The dimension names refer to the original drawing in the catalogue. The radius dimension shown there is an edge dimension and must not generally be treated as the external radius measured from the bolt centre. Check the complete installation arrangement, including hose routing.
Source: TorcUP TXU catalogue, PDF page 3.
One tool.
A suitable system.
The Uni-Swivel allows flexible hose routing. Across-flats size, cassette group and the complete installation arrangement determine the selection.
We match the pump, hose set, reaction support and accessories to your application.
View hydraulic power units ↗Understand the connection.
Choose the right tool.
The torque, across-flats size and a photo of the installation space are enough to get started.
Advice and related equipment
This specialist website is operated by WSD GmbH. Our main website brings together advice, sales, rental and service for this application.